Rechner
KAS-40-35-N-M32-PTFE
Housing M 32 x 1.5 . For use in areas with the risk of gas explosion, zone 0. Housing material: PTFE Ideal for detection of chemically aggressive media . Suitable for food applications
KAS-40-A12-N
For use in areas where there is a risk of explosion. Housing material: stainless steel VA Flush mountable Sensing distance 1...5 mm adjustable
KAS-40-A23-N-K-PTFE-StEx-N, ATEX
Housing M18 x 1. II 2 G EEx ia IIC T1-T6. II 1D IP67 T101°C. Housing material: PTFE. For use in areas where there is a risk of explosion. Ideal for detection of chemically aggressive media. Suitable for food applications.Non-Flush mountable. Sensing distance 2...10 mm adjustable
KAS-80-26-A-200-PTFE-1”-100°C-Y5
Useable for an ambient temperature up to +100° C. Ideal of detection of chemically aggressive media. Suitable for foods and parmaceutical applications. Special version with fl ange. Sealing can made with a gasket. or PTFE-tape (not supplied with the sensor). With fl ange connector M 12 x 1
KAS-80-26-A-PTFE-1”-StEx-N
For use in areas with the risk of dust explosion, zone 20. For use in areas with the risk of gas explosion, zone 1. Housing material PTFE. Suitable for foods and pharmaceutical application. Special version with flange. Sealing can be made with a gasket or PTFE-tape (not supplied with the sensor)
CAPACITIVE SENSORS - SERIES 26 WITH SEMICIRCULAR ACTIVE AREA
Capacitive sensors detect metals or non-metals, which exceed a certain capacity by approaching the active area.
CATALOGUE CAPACITIVE SENSORS KXS
The sensors of the KXS/KXA-Series are based on a different measuring principle, the three-electrode-principle. Extreme large sensing distance, up to 10-times the norm. miniature sensors from M5. Measurement of smallest changes in capacity. suitable for high-temperature areas up to +250°C (ceramics +800°C). up to three adjustable switching points in one sensor. (Duplex and Triplex operation)